 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4188, REV. A SHD226701 LOW RDS(on) HERMETIC POWER MOSFET - N-CHANNEL FEATURES: * 100 Volt, 0.022 Ohm, 60A MOSFET * Isolated Hermetic Metal Package * Ultra Low RDS (on) MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID25 IDM TJ/TSTG PD RJC MIN. -55 TYP. MAX. 20 35* 170 +150 190 0.65 UNITS Volts Amps Amps C Watts C/W RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT PULSED DRAIN CURRENT OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION THERMAL RESISTANCE, JUNCTION TO CASE Note: * current limited by package; die rating is 90A ELECTRICAL CHARACTERISTICS CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 30A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250A FORWARD TRANSCONDUCTANCE VDS = 15V, ID = 30A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8 x Max. rating, VGS = 0V, TJ = 25C TJ = 125C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 50V RISE TIME ID = 55A TURN OFF DELAY TIME VGS=10V FALL TIME RG = 2.5 DIODE FORWARD VOLTAGE IF = 30A, VGS = 0V Pulse test, t 300 s, duty cycle d 2 % REVERSE RECOVERY TIME TJ = 25C, IF=30A, VR = 100V di/dt = 100A/sec INPUT CAPACITANCE VGS = 0 V, OUTPUT CAPACITANCE VDS = 25 V, REVERSE TRANSFER CAPACITANCE f = 1.0MHz SYMBOL BVDSS RDS(ON) VGS(th) gfs IDSS IGSS td(ON) tr td(OFF) tf VSD trr Ciss Coss Crss MIN. 100 2 25 TYP. 0.022 20 110 65 100 1.0 70 8700 740 450 MAX. 0.028 4 1 50 100 -100 30 170 100 150 1.2 140 pF UNITS Volts Volts S(1/) A nA nsec - Volts nsec *221 WEST INDUSTRY COURT * DEER PARK, NY 11729-4681 * PHONE (631) 586-7600 * FAX (631) 242-9798* * World Wide Web Site - www.sensitron.com * E-Mail Address - sales@sensitron.com * SHD226701 SENSITRON TECHNICAL DATA DATA SHEET 4188, REV. A MECHANICAL DIMENSIONS: in Inches / mm .150 (3.81 Dia. .140 3.56) .420 (10.67 .410 10.41) .200 (5.08 .190 4.82) .045 (1.14 .035 0.89) .537 (13.64 .527 13.39) 1.132 (28.75 1.032 26.21) .665 (16.89 .645 16.38) .430 (10.92 .410 10.41) 1 2 3 .035 (0.89 .025 0.63) 3 Places .100(2.54) BSC 2 Places .120(3.05) BSC TO-257 DEVICE TYPE N-CHANNEL MOSFET TO-257 PACKAGE PIN-1 DRAIN PIN-2 SOURCE PIN-3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. *221 WEST INDUSTRY COURT * DEER PARK, NY 11729-4681 * PHONE (631) 586-7600 * FAX (631) 242-9798* * World Wide Web Site - www.sensitron.com * E-Mail Address - sales@sensitron.com * |
Price & Availability of SHD226701
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |